Attach cables or ropes. For a long service life, there are two types of resistance. Attach cables or ropes. Attach cables or ropes.
The specifications of the B18.2.2. Heavy nut is taller and wider than standard nut for a better hold and better security. The strength and resistance of 316stainless steel is better than 18-8stainless steel. There is no finish or coating on the plain surface. The specifications of the B18.2.2.
👤These nuts are large and crude, and it's beyond me how this equates to heavy duty. The size of the wrench was not standard and the threads needed to be chased for use. The nuts worked after a clean-up but weren't as good as I expected.
It's used in a variety of engineering lifting machinery, mining equipment, rail loading and unloading ports, forestry machinery, electrical equipment, etc. For a long service life, there are two types of resistance. Attach cables or ropes.
👤They fit fine and will do what I want, but a magnet will stick to these and it is most likely 304stainless not 316 as advertised. These will be exposed to the elements. Next duck season will be the time when I will update my review.
👤I was happy with the quality of the eyes. They were used on a cargo carrier.
👤I wasn't planning on using this eye for overhead lifting. It is a nicely finished product.
👤They're doing a great job on my roof rack.
👤I put it on my roof rack. It is strong.
👤These would have been great. Two of the four pieces were not threaded. I tapped and threaded them myself because I couldn't wait for a return. Hopefully they will hold up.
👤It's very handy to have good quality for marine applications. You probably won't find these at your local hardware store if they're less than $4 bucks each.
It is possible to increase saw blade life by applying directly to saw blades. For a long service life, there are two types of resistance. Attach cables or ropes. Attach cables or ropes.
👤I wanted a piece of T-track to be mounted on a wall and have sliding connection points for various exercises. These worked well. I used 1 x 20. I cut the "ears" of thelevator bolts so they fit in the T- track slots. You can buy threaded inserts, but they don't fit my purpose. I had to deepen the counter sunk screw holes so that the bolt heads could easily slide past the mounting screws. I now have 2 mounting points, I could use all four of the eyes. I attach my bungee tubes with some oversize carabiners. The larger carabiners are used as handles to loosen and tighten the eyes on the track. It's simple! It all works together for me.
👤Wind doesn't blow off the covers, and no mesh is easy to use to move the covers on or off torches. I put these on a bolt and washers to add weight and a handle to the torch covers. It worked well and should keep the items from rusting even after a short time of heat. The eye nut is on top of the cover.
👤These are metric and use metric channel nuts to attach to the tracks. I bought 3 sets. Two arrived perfect, one had the wrong nuts. I contacted Rhino Rack USA and they were very helpful after asking some questions and seeing the packaging error. They said they would replace the pack. I believe that the measure of a company is based on how they handle things when they go wrong. 5 stars for a rack.
👤I was charged 9.80 for shipping when the product was marked Prime. I didn't notice the shipping was added until I saw the invoice. The product looks good and would be 5 stars if it were shipped to Prime.
👤Wanted something like this for a while, didn't know what to call them, and wasn't able to find them until they showed up in an e-mail from Amazon. Excellent quality and perfect for my use. Already ordered a second one.
👤It's not cheap, it's called STAINLESS. These are nice. I used them on my sailboat. Will be buying more.
👤The product inside the package was only 5/16". I've had to return this item twice. I was very frustrated with the experience.
👤Exactly what I was looking for. Good price point. Quality part. Would order again.
👤I couldn't find anything in the UK but these small lifting eyes arrived quickly and within the predicted time. I needed a UNC thread and these little items worked perfectly. If I need more, I know where to go.
Attach cables or ropes. For a long service life, there is rust andcorrosion. Attach cables or ropes. Attach cables or ropes.
👤I used the Tow/Tie- Down-Rings on my F3 for a while, but had to reverse the bolts on the lower shock mounts.
Attach cables or ropes. It was manufactured in the United States. It was forged for strength.
👤The chain hoist was mounted on the schoos for my workshop.
The specifications of the B18.2.2. For a long service life, there is rust andcorrosion. Attach cables or ropes. Attach cables or ropes.
Universal Fit is the type of fit. For a long service life, there are two types of resistance. Attach cables or ropes.
👤This eye bolt is beautiful and flawless. This is very high quality and works perfectly. The quality really shows.
👤It could have been a smaller size. It is my fault because it is really large. I think it's really well made. I have been sitting outside for a long time.
👤This item is made in the USA and is perfect for outdoor use.
👤I used this to replace an eye nut on my boat.
Attach cables or ropes. 10pcs x M8 Ring lifting Nuts; Ring inner diameter approx. 20mm/1.78inch Ring thickness:7mm/0.3" The Metric Units standard is used for the Ring Shape Lifting Eye Nut. The screw that needs to be matched needs to be in metric units. The M8 may not be compatible with a standard 5/16 thread bolt. The thread is coarse. The material is made of 304 STAINLESS STEEL. It has good bearing capacity. The thread is high polished. It is easy to install, ideal lifting equipment. It's widely used in a variety of engineering lifting machinery.
👤Not a bad ring, but you couldn't thread in a standard M8 fastening into a single one of the rings because none of the threads were cut properly. I had to chase the threads with a tap, some of them need a slight cleaning, and others are not cut deep enough. The pitch was correct, but the diameter was too small. I think their tap was getting old and they just kept using it. They are great after they are fixed, but the quality of the finished product was terrible. You may have to fix the threads and the ring.
👤I don't think you should mention it with this product. In parentheses it says it is metric M6, but it is not. If the metric is in parentheses, it would not be deceiving. I made them work by tapping them out, but I was not happy with it. Next time, I will read the fine print.
👤The product is of great quality, but it is a bit deceiving as it states in the description that it is a metric 8mm thread. Not interchangeable at all.
👤One of the rings does not have any threads. Don't have time to send them all back for one to be replaced, they need them now.
👤This is a metric thread. This isn't compatible with a standard 5/16 thread bolt. The 5/16 is confusing and irrelevant.
👤Good for many applications.
👤The metal shows no sign of tarnishing after six months of use. Excellent quality.
See the pictures of the 2-1/2" thread length. The jam nut is thinner than the standard nuts and used with another jam nut to help prevent loosen up. The strength and resistance of 316stainless steel is better than 18-8stainless steel. There is no finish or coating on the plain surface. The specifications of the B18.2.2.
👤They are well packed and nice fit. I would buy again.
👤Excellent quality and per force. This item is large and heavy.
👤Theses are great! I only had to size them up. The tap for this type of steel is expensive. It is what to expect.
👤The steel rod was to be held in these. They seem to hold the rod. They are mounted on a plate.
Come with finished nuts. There are 2 flanges and 4 nuts. The safe load is 3,500 lbs. Most bow eyes use a crimped ring, but Amarine-made Bow Eyes come with finished nuts. See the pictures of the 2-1/2" thread length.
👤Absolutely rock solid product. It was installed on my car. 6 months later, there is no spot of rust on it. This size was too large for my application, but I will never worry about it not being strong enough. This thing is strong. There are more than one variation of this product. Some have actual washers, some have the washer plate. It's up to you. The others could have also worked, but for my Gheenoe, this style worked great. I ordered this length too long for my application. These are long bolts. Most people don't need long bolts. My plan was to put washers and nuts on the inside of the item to attach a strap with a hole in it to secure other items near the bow. The battery box is 50 pounds. This has worked out well so far. If you need the extra length, I would recommend this item. You could get away with something shorter for most applications.
👤These are heavy duty, and look to be good quality. The listings are vague, especially with the dimensions. I accidentally ordered these larger ones because I was looking to replace existing hardware. I don't know if I'll keep them, but I thought I'd add photos with my ruler showing their measurement.
👤The body of the eye is not shown in the illustration on the product listing. Measure with a micrometer. Photographs for comparison. They didn't seem to care. Too good to be true is a lesson learned. No good.
👤I had a previous bow eye that only had a single bolt, but it finally gave out and needed to be replaced. The two bolt eye should last the rest of the boat's life.
👤The piece is easy to install on the boat. I cut a thicker bar for the backing because I live longer than 2 hours. The roads in Arizona are not nice. The product was described and received a solid 5 stars.
👤The 4 that were bought were used on a utility trailer. The pipe top rail did not want to tighten very much. The nut was taken back off to make the lock washer. The nut wouldn't come back off. It had to be cross threaded and stuck to the top nut. Don't try to remove it once it's tightened down.
👤The U bolt is ok. The nuts are shown in the pics. I have to find some nuts in town.
👤These are very heavy and well made, they have nuts on both ends so you can adjust how much of a ring you want extended out off the transom.
Eye nut 1/2 products from Us Stainless. In this article about eye nut 1/2 you can see why people choose the product. Small Parts and Us Stainless are also good brands to look for when you are finding eye nut 1/2.
Us Stainless, Small Parts and Us Stainless are some of the best brands that chosen by people for eye nut 1/2. Find the detail in this article. Us Stainless, Us Stainless and Ken Forging are also brands that their products are worth to check.