The plastic pouch case has carbon steel pipe taps in it. Perfect setting. The star nut needs to be put into the fork steerer. The headset bolt is too low. The steerer wall is too high for the star nut. COMPATIBILITY: The threadless nut Setter is used to install the star-fangled nut. The star nut is easy to install and use. High quality steel is heat treated. You can order now and pay free. They can provide a life time warranty for their product. It was made in Taiwan.
👤The Bike Hand Bicycle Fork Star Nut Setting tool was purchased by me because I was going to upgrade my forks. Bike Hand made this tool. I have purchased several tools from Bike Hand and have been impressed with their quality and price. It is not comparable to the prices of Park Tool. If you put a screw in a star nut and hammer it into a steerer tube, you run the risk of damaging the threads while hammering. I would definitely recommend this tool for the home bike kit. The star nut Setter came with two star nuts. The tool alone is worth the price. Setting a star nut with a tool is very easy. There is a steel tube that has an inside diameter of 1-2/8 inch on one half and is slightly narrower on the other. The tube cannot be just slid down the steerer tube. The star nut slides onto the black plastic lunger of the second steel tube. The steerer tube is already placed on the top of this slide. The star nut will be set to the correct depth if you use a mallet to tap down the lunger. The video makes it look like you have to really hit the lunger, but from my experience, it does not take a lot of strength. Don't bash the tool, it should last a long time. A star nut can be set with a lot of strength and power. I hope you found the review helpful.
👤There are few things I do on my bike. Things never seem to go right when I buy such tools. I had this tool. It's seriously. The thing is well made and designed. You lay out the guide which has a collar to sit on the steerer so it doesn't fall/shift, you pop in a star nut, and voila. The nut set is perfect. I thought the lack of threads on the punch portion would introduce play, but it actually is a better design. The force is put across the top of the star nut instead of on the threads. It was brilliant. I'm going to buy new forks so I can put star nuts in them.
👤A good idea. It is better to have a star nut tool that threads into the star nut, because the star nut needs to be held securely when driving into a steerer tube. The tabs on the star nut can be seen on one side if not held secure. Some people don't care, but putting a star nut on a fork with an alloy steerer tube should be done correctly. There is a similar tool that threads onto the star nut.
👤I don't like putting in star nuts. Setting the depth is a drag. It is the easiest thing you have done all day. I just put the forks on my shoes and think about how cheap I was before and how bad I was. Even if you only put in one nut, it's a good idea to use the tool again. It comes with a couple nuts.
The package includes a variety of popular sizes of screws, nuts and washers, which are commonly used in machinery, furniture, car and motorcycle repair. Carbon steel Pipe taps can be used to clean or re-thread damaged or Jam Pipe threads. Uncoated tools are suitable for a wide range of applications because they are just the base. A round shawk with a square end. The straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. The plastic pouch case has carbon steel pipe taps in it.
👤I used the 1/4" tap after getting this set. The first time it broke, it was used. The new order arrived quickly, but the taps were missing, and only three of the five were in the set. I was not happy with the overall product and the poor quality care that was put into a replacement. I wouldn't buy this brand again.
👤I'm an experienced instrument maker, shop supervisor and owner of a business that has produced scientific instruments for many years. Machine thread taps are almost all the taps I need. I put the new drill America tap set in the tool crib because my old ones were getting dull and I wanted to replace them. I tried to use the tap from that set but it was past the return date. The tap turned very hard and produced a ragged hole with no chips or usable thread. I tried to use the drill America set to tap a brass piece with the same results, but I had to use one of my old taps. The cutting teeth of the Drill America taps are shallow and will not shave thread or produce chips in any material, even using large holes and plenty of cutting fluid. Trying to make thread with this set is like trying to use a threaded pipe as a tap. I offered to send a tap for Drill American to look at, after I contacted them about the problem. Drill American has never responded. The man is Ron Hilliard.
👤I needed this to repair a medical device so a patient could be treated in time. I think Drill America cared less about them.
👤Disappointed. I only received 2 out of the 5 in the "5 Piece Set" and not the size I needed right now. Drill America, you have better reviews for customer service.
👤The value is great. Will cut threads in anything a mortal person can drill a hole in. There are soft metals and plastic. I wouldn't use these on steel or cast iron to clean up a damaged thread. I used 1/2” polycarbonate for the fish tank filter. The tool box has a great capability. It's great in a pinch for things like fish, irrigation, or around a farm.
👤Only one item out of five were in this package. I'm frustrated because it puts my project out for a couple more days.
👤The rest of the set is worth having for future projects. I was able to save hundreds of dollars on a replacement irrigation pump by fixing the drain hole with these. I need to cover the pump in the winter.
👤Even though it was rough on the taps, I didn't have a problem with this one, even though it was 140-150 galvanized. Stayed sharp with no chipping or breaking.
👤I have only been tapping aluminum, but I am surprised. I needed to tap a few wacks. Buying all three taps individually would have been more expensive. They seem to be well made, they cut nice treads that allow installation of NPT plugs and fitting in custom intake and throttle body modifications with no issues.
The specifications of the B18.2.2. The steel is marine grade and has heavy duty lifting eye nut. The working load limit is 2,000 Lb.
👤It was used for a quick connect.
Universal Fit is the type of fit. For a long service life, there are two types of resistance. Attach cables or ropes.
👤This eye bolt is beautiful and flawless. This is very high quality and works perfectly. The quality really shows.
👤It could have been a smaller size. It is my fault because it is really large. I think it's really well made. I have been sitting outside for a long time.
👤This item is made in the USA and is perfect for outdoor use.
👤I used this to replace an eye nut on my boat.
Click on the name above in blue to view their full catalog of Welders, abrasives, chain/wire rope, tools and more. A wide copper foil tape can wrap the cable, machine component, connection, fan, extendable antenna, computer component fully. Excellent flexibility with aDHESIVE TAPE. The dual conductive tape can be twisted, bent, tore, and used by hand, no need to apply with other tools. The oil leak was caused by Emily Shielding Copper FOIL. The copper tape can protect your electronics from interference. Plants can be protected with copper tape around the base. There is a tape that can be applied to stained glass. There is a dual containment. Current will flow through both sides of the tape, because of its dual-conductivity. The effectiveness between components will not be affected by the tape.
👤The flowers were being slimed by the snails and they were taking up residence in the pots on the front steps. I would clean up the mess and find the next batches within a couple of days. I put a single wrap of copper foil tape around each planter pot. The snails have never returned to any of the plants that have seen it, as if it were a decoration intended as part of the pot. Several friends with snail issues are thrilled with the same results that I did. It was a great solution.
👤This was an easier project than I anticipated. The copper foil tape is thin, but not so thin that it will tear. Great product! I could do a lot of guitars with this roll.
👤I was very hopeful and excited, but then I was very disappointed after applying. The basil in my garden bed was being eaten by slugs. I had old copper pennies, crushed egg shells, and DE that worked. I didn't want to worry about it raining or the bed being watered with the movement of pennies and DE turning null and void. I bought this tape based on the reviews I had read. The tape is thin andflimsy. If it works, it won't be a big deal. It did not. I feel like the tape attracted more bugs. I found more and more every morning, and this morning I found a slugs on tape. I am envious of the reviews that say deters slugs, and I am wondering how long they waited before leaving. I live in California and I don't know if we have super slugs or what, but I did find one of my mints and one of my herbs to be a natural herbal deterrent. I bought for purpose. Also, peppers in large pots are still being devoured. I plucked 50 slugs today. I am already in the return process.
👤I bought this to make sure snails don't eat my strawberries. It was easy to apply and stick to the wood. I put a snail at the bottom of the garden bed to see if it would try to crawl up. The snail crawled over the copper tape, mocking me. I found snails in the garden bed and bites in my strawberries, but this did nothing. eggshells have been used all around the garden bed lip to reduce the amount of snails. They are not sure if they got hurt in the process of crawling across the jagged shells, so they stay at the edge. I think I'll use it for crafts and giftwrap because it's pretty and has a nice glue on it. It's really important that you don't apply without bubbles or wrinkling.
👤We had high hopes for the fight. We put it on, and one person held it while the other went around the perimeter of the raised bed, and then went in to make dinner. We went back out about 30 minutes later. Crawled over the copper tape and headed for the strawberries. Do I need to say more? It's really bad.
You can order now and pay free. They can provide a life time warranty for their product. It was made in Taiwan. It improves cutting, increases tool life and delivers better finishes. There are drilling, boring, sawing, tapping, and tight tolerance machines. The best performance can be achieved by applying directly to the tool. It's easy to clean up when it's dry. It is possible to increase saw blade life by applying directly to saw blades.
👤It's very slippery, and I love the consistency. It was easy and neat. The component of the star has an unpleasant smell. It's like the kind of thing that happens when you're in a band. It works well and goes a long way.
👤This stuff is less expensive than other products. It stays in the hole. Since it is a wax, it keeps the temperature cool. It makes drilling a breeze.
👤The difference between when I wasn't using it and when I bought it was huge. The tip was kept relatively cool.
👤The product is easy to use and prolongs the life of drill-bits. This product is a paste that can be applied without overflow or drips.
👤It works well on my hacksaw blades. It makes cuts quicker. I haven't used it on drills yet.
👤I had to drill into it. The product made it easy to drill into other metals.
👤Suggests you add a cutting oil, and also say that it does the job of cutting oil.
👤This stuff is easy to cut.
Foreign material and pollutants are removed. New high quality screws nut and washers. The package includes pan head bolts, nuts and washers. 510 pieces is the package quantity. The material is high-quality 304stainless steel. The package includes a variety of popular sizes of screws, nuts and washers, which are commonly used in machinery, furniture, car and motorcycle repair.
👤Make sure the kit is the right size for you. I assumed these would come with some larger washers, but I didn't see a diagram. Not dinging them for it was a bad idea. I was too lazy to read the diagram in the product image. I need good value for small nuts.
👤The item arrived in a bubble wrapped envelope, the corner of the plastic container was smashed, but nuts and bolts were still intact thanks to the extra foam padding inside the container.
👤I would be hesitant about using them anywhere that they would be under any stress, but for appropriate uses it's a nice little kit. I picked these up because I needed a couple of the included sizes for a project, but I have found myself grabbing one of these nuts or bolts instead of reuse an old part that was rusty/ rounded off/stretched. I think I'll be happy I had them around.
👤I needed these to finish my solar panel array install. They were sturdy, have held up well, and have a good assortment. It comes in a nice organizer case, and it's very handy because of the nuts, washers, lock washers, and bolts. We will see how they hold up.
👤I didn't appreciate the size descriptions before buying. It is an okay set, but it has a lot of small screws and nuts. My mistake was not quantifying the metric size.
👤This kit is a must have if you own a Japanese car, motorcycle, or 4 wheeler. The plastic box that most of these kits come with is junk. I will tell you that this storage box is pretty good. I am very happy with this kit.
👤A brick and mortar store has a lot of small packages. It's nice that I can keep all of my bolts in one place.
👤When you need them, they're essential, but it's not always necessary to use a smilng. If we just bring the stainless, we don't need to carry another package. We don't need many of any given size. That's why a convenient assortment like this is perfect for people who work on construction. I've used six different sizes of these bolts to fix things, including my wife's shoe rack. I'll pick up some spare parts when I see a certain size running low. The see-through plastic case is convenient for a team of lawyers in a lawsuit. I don't expect the bolts to fail. They are made well enough to last, which is what it tells me. I don't feel like I have to carry the extra weight in my tool bags. It's a small kit that you can use to add to your tools. Even with gloves on, it is easy to open the lid. What else do you want? Get some.
👤304 steel is austenitic and doesn't stick to magnets very well. These bolts and lock washers are similar to regular carbon steel. The nuts and flat washers are not as strong of a hold. I hope the resistance is satisfactory.
Attach cables or ropes. For a long service life, there is rust andcorrosion. Attach cables or ropes. The load was breaking. The load was breaking.
👤One eye nut was not the same as the others. Did not discover until after the window had closed. As the package was marked, the other was 1/6”-20.
👤Nice quality and heavy duty. I had to get a new size at a certain size.
It's used in many marine and industrial applications to connect cables or ropes to objects. The M6 ring is threaded nuts. The total height is 27mm/1.38" and the ring is 6mm/ 0.24". The material is 304 STAINLESS STEEL with a nut inner diameter of 6mm and a ring inner diameter of 16mm. It's used in a variety of engineering lifting machinery, mining equipment, rail loading and unloading ports, forestry machinery, electrical equipment, etc. Hxchen guarantee high quality and good service. Order now with their 90-day money back guarantee. If you don't like the quality of the product, you can either get a replacement or a refund. Hxchen guarantee high quality and good service. Order now with their 90-day money back guarantee. If you don't like the quality of the product, you can either get a replacement or a refund.
We have a lot of specifications. It is made of Q235 carbon steel. The galvanized surface has a long service life. It is easy to install and use. There are two sizes available: one for small and one for large.
👤They would work well in their purpose. Lifting eyes is a part of restoration work. These were less expensive than others and had a rougher surface finish, which was better for appearance and function. I returned them because of the finish. Lifting eyes are meant to be lifted over function. I have used a very smooth STAINLESS for my industrial restorations.
👤These work well. I used to tie my shade sail into my pergola. I already had bolts in the corners so these worked great to add the function without adding more bolts. I look forward to seeing how the weather will be. I live in California. I think they will last forever.
👤Some project hardware worked well.
It is possible to increase saw blade life by applying directly to saw blades. For a long service life, there are two types of resistance. Attach cables or ropes. Attach cables or ropes.
👤I wanted a piece of T-track to be mounted on a wall and have sliding connection points for various exercises. These worked well. I used 1 x 20. I cut the "ears" of thelevator bolts so they fit in the T- track slots. You can buy threaded inserts, but they don't fit my purpose. I had to deepen the counter sunk screw holes so that the bolt heads could easily slide past the mounting screws. I now have 2 mounting points, I could use all four of the eyes. I attach my bungee tubes with some oversize carabiners. The larger carabiners are used as handles to loosen and tighten the eyes on the track. It's simple! It all works together for me.
👤Wind doesn't blow off the covers, and no mesh is easy to use to move the covers on or off torches. I put these on a bolt and washers to add weight and a handle to the torch covers. It worked well and should keep the items from rusting even after a short time of heat. The eye nut is on top of the cover.
👤These are metric and use metric channel nuts to attach to the tracks. I bought 3 sets. Two arrived perfect, one had the wrong nuts. I contacted Rhino Rack USA and they were very helpful after asking some questions and seeing the packaging error. They said they would replace the pack. I believe that the measure of a company is based on how they handle things when they go wrong. 5 stars for a rack.
👤I was charged 9.80 for shipping when the product was marked Prime. I didn't notice the shipping was added until I saw the invoice. The product looks good and would be 5 stars if it were shipped to Prime.
👤Wanted something like this for a while, didn't know what to call them, and wasn't able to find them until they showed up in an e-mail from Amazon. Excellent quality and perfect for my use. Already ordered a second one.
👤It's not cheap, it's called STAINLESS. These are nice. I used them on my sailboat. Will be buying more.
👤The product inside the package was only 5/16". I've had to return this item twice. I was very frustrated with the experience.
👤Exactly what I was looking for. Good price point. Quality part. Would order again.
👤I couldn't find anything in the UK but these small lifting eyes arrived quickly and within the predicted time. I needed a UNC thread and these little items worked perfectly. If I need more, I know where to go.
Eye nut 3/8[dq] bail 1/2[dq] tap products from Bike Hand. In this article about eye nut 3/8[dq] bail 1/2[dq] tap you can see why people choose the product. Drill America and Usweldwire are also good brands to look for when you are finding eye nut 3/8[dq] bail 1/2[dq] tap.
Bike Hand, Drill America and Usweldwire are some of the best brands that chosen by people for eye nut 3/8[dq] bail 1/2[dq] tap. Find the detail in this article. Us Stainless, Lovimag and Lubri-cut are also brands that their products are worth to check.