Best Eye Nut 3/8

Nut 29 Nov 2022 10+ Comments Open

1. Pieces Stainless Steel Lifting Marine

Pieces Stainless Steel Lifting Marine

It's used in a variety of engineering lifting machinery, mining equipment, rail loading and unloading ports, forestry machinery, electrical equipment, etc. For a long service life, there are two types of resistance. Attach cables or ropes.

Brand: Us Stainless

👤They fit fine and will do what I want, but a magnet will stick to these and it is most likely 304stainless not 316 as advertised. These will be exposed to the elements. Next duck season will be the time when I will update my review.

👤I was happy with the quality of the eyes. They were used on a cargo carrier.

👤I wasn't planning on using this eye for overhead lifting. It is a nicely finished product.

👤They're doing a great job on my roof rack.

👤I put it on my roof rack. It is strong.

👤These would have been great. Two of the four pieces were not threaded. I tapped and threaded them myself because I couldn't wait for a return. Hopefully they will hold up.

👤It's very handy to have good quality for marine applications. You probably won't find these at your local hardware store if they're less than $4 bucks each.

2. Pieces Stainless Steel Lifting Marine

Pieces Stainless Steel Lifting Marine

The load was breaking. The UNC heavy duty lifting eye nut is made from marine grade steel. 1000 Lb is the working load limit.

Brand: Usweldwire

👤It was used for a quick connect.

3. Stainless Steel US Lifting Marine

Stainless Steel US Lifting Marine

Attach cables or ropes. For a long service life, there are two types of resistance. Attach cables or ropes. Attach cables or ropes.

Brand: Us Stainless

4. Stainless Turnbuckle Locknuts Marine Metric

Stainless Turnbuckle Locknuts Marine Metric

The load was breaking. For a long service life, it is resistant to rust. The M10 size is 10mm. Smooth quality.

Brand: Us Stainless

👤I have a shed next to my house that is leaning over. I bought some wire, ferrules and a turnbuckle at Home Depot to pull it back against the house. When I started cranking on the turnbuckle, it felt flimsy, so I looked up the load limit on the turnbuckle, and it was 215 lbs. I was looking for a better one on Amazon and found this one. I think it's 6,800 lbs. When I started cranking on it, I knew that it was going to stay together. The end loops are welded shut. I put the shed against the house and it's perfect now. Very impressive. I don't know if it will support 3 1/2 tons, but it is pulling at least 1,500 pounds at my house. I'm going to get a second one for the back of the shed.

👤The turnbuckle is strong and sturdy. The bolts on the ends make sure the turnbuckle doesn't move. The product is very reliable. Purchase this product to protect my sunglasses.

👤The turnbuckles seem to be of good quality. It's important to use 10 w oil or lubrication. When I was making adjustments, one of the five that I bought froze up. It won't budge even though I used a lot of lubrication. The one that broke got 4 stars. I used these to tension the sun shades in my backyard.

👤The construction is very high quality and the price is the same as mediocre quality galvanized turnbuckles. Definitely recommend.

5. Antrader 10pcs Stainless Lifting Threaded

Antrader 10pcs Stainless Lifting Threaded

Attach cables or ropes. 304stainless steel is a high quality material. Excellent lifting equipment, easy to use. The M8 ring is Threaded Nuts. The total height is 35mm/ 1.38" and the ring thickness is 8mm/ 0.3". It's used in a variety of engineering lifting machinery, mining equipment, rail loading and unloading ports, forestry machinery, electrical equipment, etc. It's used in a variety of engineering lifting machinery, mining equipment, rail loading and unloading ports, forestry machinery, electrical equipment, etc.

Brand: Antrader

👤These will save you a lot of money. They have held up well. They are used for roof rack mounts on our land cruiser. You can watch the videos on the internet by searching for "brady adventures roofrack" on the internet.

👤I was very impressed when I first saw these. The eyebolts looked good and had some weight to them. I knew they would be strong enough to tie down gear on my roof rack. I was only able to thread them through 5 of my eyebolts when I used my M8x1.25 bolts. The threading on the other 5 was very poor, and on some eyebolts, I don't think they even opened the hole all the way because the bolts wouldn't clear. It was a combination of not drilling or tapping all the way through, and/or having collapsed threads or burrs in the threads. I was able to get some bolts out of the eyebolts, but they were useless because they were stuck in the eyebolts thread. I lost my tap when I tried to chase the thread with my tap, even though I used tapping oil and the proper tapping method. I have 5 working eyebolts and they are enough for what I need right now. I think this is a lesson to always buy good quality hardware.

👤You will most likely have issues if you don't have an M8x1.25 tap or thread chase. I was able to clean all of the threads with a tap and I am happy with the results. I had to chase the bolts that I got. If you could find these at a local hardware store, you would get the same quality. If you don't want to spend more than 14 bucks for 2 plus shipping from Front Runner, these are a good alternative.

👤Antrader was able to refund the cost of the piece after they were unable to send a replacement. Good customer service has led to an upgrade in the rating. I bought a bunch of these from Antrader and they have been decent. I recently ran into a dud that had problems with its threading. I tried several times to get it to work, but discovered that the threading inside was messed up. Will try to get in touch with them to see if they can send a replacement for one of these. Will update this review after the response.

👤These are the same rings you can buy from FrontRunner for twice as much. They work well on the rack and the system as a whole. The bolts need to be gotten for it. I have not had a problem with them coming loose.

👤The product was great and I was happy with the purchase. I needed to make tie down anchor on my roof rack. The bag was torn open inside the box and I only received 9 items. This is the only downside, I am happy about that.

6. Stainless Steel Lifting Marine Grade

Stainless Steel Lifting Marine Grade

Attach cables or ropes. For a long service life, there are two types of resistance. Attach cables or ropes. Attach cables or ropes.

Brand: Us Stainless

👤I used the eye nut as an anchor point on my tripod to keep it stable in windy environments. The 316 was a reasonable and elegant solution for my problem, even though it was a bit too much for my application.

👤The product was perfect for mounting to the Ladder Rack cross bar. I can attach items to the ladder rack from the bottom. There is a The finish is excellent and the amount of threading was perfect. Will purchase more as needed.

👤I had to put these on my boat trailer because the tiedown strap was rubbing my tail lights. They worked well. Good and sturdy.

👤The rear tray hole of my superjet was used to allow for a trailer tie down.

👤I needed something to attach to the project. Locktite was secured with a 3/8 rod. It was able to handle the stressors of use without problems.

👤Good quality product, does what it's supposed to do.

👤The product made a bad situation better.

👤What I was looking for. It seems to be high quality.

7. Shape Lifting Stainless Threaded Fastener 4

Shape Lifting Stainless Threaded Fastener 4

See the pictures of the 2-1/2" thread length. Refer to the picture for more Size information. The material is made of 304 STAINLESS STEEL. It has good bearing capacity. The thread is high polished. It is easy to install, ideal lifting equipment. They have a lot of specifications. They have a lot of specifications.

Brand: Seeraphee

👤Some of them weren't manufactured well. This makes them either not thread correctly, thread at an angle, or have missing threads.

👤If you need it for a bug zapper like my Sears one, you'll have to use M10x1.0 which is the thread size of this M10 ring.

👤It was used in a project. It was what I needed to link bracing cables.

👤They are so strong that they have confidence in their security. The price is also sensible.

👤It arrived in 24 hours as promised. Good quality at a good price. They used 8mm bolts on the roof rack.

8. Pieces Stainless Steel Lifting Marine

Pieces Stainless Steel Lifting Marine

Attach cables or ropes. For a long service life, there is rust andcorrosion. Attach cables or ropes. The load was breaking. The load was breaking.

Brand: Us Stainless

👤One eye nut was not the same as the others. Did not discover until after the window had closed. As the package was marked, the other was 1/6”-20.

👤Nice quality and heavy duty. I had to get a new size at a certain size.

9. Amarine Made Stainless Marine 2 Inch Optional

Amarine Made Stainless Marine 2 Inch Optional

Come with finished nuts. There are 2 flanges and 4 nuts. The safe load is 3,500 lbs. Most bow eyes use a crimped ring, but Amarine-made Bow Eyes come with finished nuts. See the pictures of the 2-1/2" thread length.

Brand: Amarine Made

👤Absolutely rock solid product. It was installed on my car. 6 months later, there is no spot of rust on it. This size was too large for my application, but I will never worry about it not being strong enough. This thing is strong. There are more than one variation of this product. Some have actual washers, some have the washer plate. It's up to you. The others could have also worked, but for my Gheenoe, this style worked great. I ordered this length too long for my application. These are long bolts. Most people don't need long bolts. My plan was to put washers and nuts on the inside of the item to attach a strap with a hole in it to secure other items near the bow. The battery box is 50 pounds. This has worked out well so far. If you need the extra length, I would recommend this item. You could get away with something shorter for most applications.

👤These are heavy duty, and look to be good quality. The listings are vague, especially with the dimensions. I accidentally ordered these larger ones because I was looking to replace existing hardware. I don't know if I'll keep them, but I thought I'd add photos with my ruler showing their measurement.

👤The body of the eye is not shown in the illustration on the product listing. Measure with a micrometer. Photographs for comparison. They didn't seem to care. Too good to be true is a lesson learned. No good.

👤I had a previous bow eye that only had a single bolt, but it finally gave out and needed to be replaced. The two bolt eye should last the rest of the boat's life.

👤The piece is easy to install on the boat. I cut a thicker bar for the backing because I live longer than 2 hours. The roads in Arizona are not nice. The product was described and received a solid 5 stars.

👤The 4 that were bought were used on a utility trailer. The pipe top rail did not want to tighten very much. The nut was taken back off to make the lock washer. The nut wouldn't come back off. It had to be cross threaded and stuck to the top nut. Don't try to remove it once it's tightened down.

👤The U bolt is ok. The nuts are shown in the pics. I have to find some nuts in town.

👤These are very heavy and well made, they have nuts on both ends so you can adjust how much of a ring you want extended out off the transom.

10. Pieces Stainless Steel Lifting Marine

Pieces Stainless Steel Lifting Marine

Smooth quality. For a long service life, there is rust andcorrosion. Attach cables or ropes. Attach cables or ropes.

Brand: Us Stainless

👤Put a piece of thread through it. Works well.

👤There was a package of 2 of the 5/16 UNC size. One was the right and the other was the wrong one. A wrong nut looks to have been packaged.

👤I needed a nut instead of a bolt, and I was glad to find these, I didn't have to buy a bunch of them. I usually get the eye bolts from Williams, but they don't do the nuts anymore. The threading on these is pretty decent, it's just a little blabber on the inner exit hole. I was expecting them to be made in China, but there is no mention of that on the product or on the website. I don't give them five stars because I think the price is too high for what they are and I haven't put them through the paces with loads. The light duty of the large drill press vise requires the use of this pair. It was worth the buy.

11. Uxcell Female Thread Stainless Lifting

Uxcell Female Thread Stainless Lifting

Attach cables or ropes. The ring's overall height is 1.17 304 STAINLESS STEEL is anti-rust, resistant tocorrosion and durable. It is designed to be screwed onto various lengths of threaded stock or bolts. It's used in many marine and industrial applications. It's used in many marine and industrial applications.

Brand: Uxcell

Summary

What is the best product for eye nut 3/8?

Eye nut 3/8 products from Us Stainless. In this article about eye nut 3/8 you can see why people choose the product. Usweldwire and Us Stainless are also good brands to look for when you are finding eye nut 3/8.

What are the best brands for eye nut 3/8?

Us Stainless, Usweldwire and Us Stainless are some of the best brands that chosen by people for eye nut 3/8. Find the detail in this article. Us Stainless, Antrader and Us Stainless are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com