Best Screw Eye Zip Ties

Ties 8 Oct 2022 10+ Comments Open

1. FIXSON Mounting Cable Plastic Mount

FIXSON Mounting Cable Plastic Mount

Their plastic cable tie mounts can be used with wire management clips, electronic cord organizers, throttle cable clamps, marine cable clamps, and any other clean looking wiring needs. Ties are 8 inches long. cable ties secure bundles to walls, studs or other surfaces It is made from 100% nylon 6/6 material. The tie has locking teeth on both sides. Zip Ties have mounting eyes that accept screws. Zip Ties have mounting eyes that accept screws.

Brand: Fixson

👤I had been buying these from Lowe's. I wanted to find a less expensive source because I use so many. These were cheap, and I guess you get what you pay for, because they were almost useless due to breaking. Couldn't even tighten them.

👤The zip ties were brittle and when I tried to pull them tight, the whole zip tie snapped.

👤My wife works at the local Harley dealer and I wanted to give these to her.

👤These aren't strong at all. It broke before it was tight. Do not recommend them. It did not have hardware.

👤More "milky clear white" than "solid white". I got these to match my wall, but they don't match as well as I would have liked.

👤This is a great idea. I've tried to push a small screw through a zip tie before. It has never worked. There is a This allows you to secure a zip tie with a screw. There is less strength with small screws. You will find these not very resistant. It's great for keeping wires in a home/office environment going in the right direction and it's also great for holding wires in a physical work area or outside.

👤The package of 100 short and thin zip ties is suitable for small quantities of cables. They are strong and hold their ground well. They are very easy to use. They are a little above the ordinary because of the eyelet into which you can put a screw or bolt to hold the cables in place. This is a nice touch. It can be useful on long cable runs, but you won't use it all the time. I will give these five stars for value and utility.

2. Inch White Nylon Zip Ties

Inch White Nylon Zip Ties

It's perfect for: cable management, repairing and maintaining machinery, spare parts or in the garden. 100 count, very strong and durable, made in the USA. The indoor and outdoor temperatures are -40 F to +185 F. The built-in clip makes it easy to install. The UV material has a great Direct Sunlight rating. The quality assurance includes a US manufacturers warranty. The quality assurance includes a US manufacturers warranty.

Brand: The Cimple Co

👤These are cable ties. I had quality problems with zip ties made in China, so I went to the trouble of researching cable ties that are made in the U.S.A. Well, guess what? I'm going back to China because the USA zip ties fail more often than the China-made zip ties.

👤It seems like every zip tie is broken. I am a little disappointed with the price.

👤It's a great way to keep cables off the floor.

👤It arrived quickly. Attach it to the fence with wire. It works!

👤No issues were expected.

👤ZIP TIES were junk. Some people did not do some bad things. Lock at all times.

3. HS Plastic Screw Mountable Electrical

HS Plastic Screw Mountable Electrical

The length is 12 inches and the Tensile Strength is up to 50 lbs. The nylon 66,UL 94v-2, UV resistant,50 lbs tensile strength is listed. 100 pieces in a poly bag with hang hole are zip ties. The teeth engage as they should, self-locking design ensure bundle wires more tightly and secure. The teeth engage as they should, self-locking design ensure bundle wires are more tightly and secure, and it is popular with vintner,decorator,designer,engineer,students, and fathers. Quality guarantee and 5-star customer service. Let them know if you're not completely satisfied with your cable ties and they'll give you a full refund or replacement. Quality guarantee and 5-star customer service. Let them know if you're not completely satisfied with your cable ties and they'll give you a full refund or replacement.

Brand: Hs

👤I wanted to hang some mister heads on my patio. I had to replace half of the zip ties I used because they broke in my hand trying to tighten them up. It's not like I was running them over metal. The top goes into the bottom where they start when I broke my hand. It was broken with very little pulling. If they were 75% off, I wouldn't buy them again because they break in half almost as frequently as they don't. I have no faith that they'll stay fastened. I'm sure they will break off. I replaced some with thinner ties that did not break off. We'll see how it goes. Just know that you have been warned. These are garbage.

👤I have hundreds of different zip ties in my bag, ranging from thin plastic ones to giant 17" ones to metal ones. Was going to use them to separate cables. I was just looking for a bigger zip tie. I was surprised that they are not brittle, they are stronger than a lot of my other zip ties. Not sure if some people just ended up with bad batches or if they have been upgraded after being called brittle. They're strong for their size. I'm going to buy a second pack for general use.

👤Not happy with these. They are not the same as in the picture. The color is more of a computer plastic tan. If you want a white color that blends in, this isn't it. It is not a big deal if you agree with that color. I was going to bundle and run wires under the table. More than 50% of these broke during the installation. One or both of the connection points at the base broke while trying to use it. I would never recommend this product to anyone.

👤Zip ties are not all created the same. I bought these to attach rain gutter extenders to my down spouts. There were 14 zip ties last year. They thought they'd work in the same application. Nope. The zip ties have teeth on one side only. If you want a tight seal, that matters. The zip ties were slick plastic on the back side, so I couldn't tighten them as much as I wanted. The reason they worked better is because the old ones have teeth on both sides, which makes it easier to crank them down without the zip tie spinning. The left and right pictures are of my old zip ties. If you're not worried about the zip ties being tight, they work fine.

👤I ordered these in a rush and found white ones that look like they are almost glowing in the dark shade of yellow, but they are not. You can see the comparison against my white walls by looking at the photos I posted.

👤I got these ties to attach the wooden plank in the fencing. Strength and ability to survive the elements were important. Each tie had a length of 13 3/4" and a width of 3/16". I needed to attach several ties, end to end, for each plank, but after trying to attach ties to each other end to end without success, I had to look up the procedure on the internet. It was very easy once I learned that. I was able to get a tight fit with these ties. They've been out in the wind, rain, and sun for weeks, without any damage. A good purchase.

4. Gardner Bender 48 308UVB Electrical Management

Gardner Bender 48 308UVB Electrical Management

It's great for all your needs. bundles are secured to walls, tapestries or other surfaces. Accepted but not included is the #10 screw. Smooth edges make it easy to slip during pull-thru. There is a patent design with locking on both sides of the tie. A strong relationship. It was made from 100% NYLON 6/6 material. It's easy to secure bundles to walls, studs or other surfaces. UVB ties are made to resist harmful light rays. UVB ties are made to resist harmful light rays.

Brand: Gardner Bender

👤I am using these on the job and they are cracking and breaking. I install home audio/visual equipment. I have used many zip ties. These are the worst. I might have got a bad batches. I hope so. They are not very useful. I thought the first few were my fault. I was pulling them too tightly. Or use the drill. I started laughing when I got to the tenth. I can break them with my hands. I am not strong.

👤I like to keep everything neat and tidy in the ceiling and walls when I run wires. The trick is to make a large loop at first and only tighten them down when the job is done, but it also means you don't waste any by cutting and redo them. I've used a lot of screws and the eyelet is right for them. I keep them in my wiring bag when I buy a large pack.

👤Tie is not toothed on both sides. Only one way to mount them against a wall. The lead end is behind the connection. Will is different than shown. It was delivered as promised.

👤Even if you don't need the anchor, it's still useful.

👤I think all but two have been used, and not a single zip has been faulty.

👤Does a good job of holding wires.

👤They are okay. It is hard to find good wire ties.

👤I am not sure if I would trust them with the rated 50 pounds, but I am using them to hold wiring in place on a boat and they work perfectly.

👤The product arrived on time and was well packaged. Good quality for the price.

👤As long as they stay at this price point, there are great mounting cable ties.

👤It was very well used to secure copper wire.

5. PERFECT VISION MOUNTING SATELLITE CT7BLK MH

PERFECT VISION MOUNTING SATELLITE CT7BLK MH

The Zip Tie Adhesive Mounts are guaranteed for a lifetime. They have a lifetime warranty and 60-day money back guarantee. Please contact them if you are not satisfied. The US after-sales service team is open 24/7. There is no risk to buy. There are 100 black cable ties with a hole. There are indoor and outdoor areas. The material is UV black NYLON 6/6.

Brand: Perfect Vision

👤I was sad when our local nut and bolt vendor stopped carrying these types of zip ties. They work well when used correctly. I secured the wiring on my Jeep with the help of the lighting and screws that I used to drill into the wire.

👤They do what they are supposed to do. The entry for the screw hole should be on the other side. If you want to get the end into the hole, you have to insert the end before you screw down the cable.

👤We don't want to get stuck in the carpet on the boat floor or tangle with other rods if we don't have something that works on our fishing rods. I like to think outside the box and was happy to find these.

👤Good stuff! I use a lot of tie wraps. I use wire ties and a stapler to hold them in place. I have never heard of or seen these before. I love them and tried them. My most recent project has been made very tidy by them. New photos of another project where these things were great were added.

👤These tie raps are strong enough to bundle cables that fit into the entire wrap to the second lock, when you need to attach a cable to a wall with a screw mount connection. DALE.

👤It's much easier to install a cable than it is to install a separate cable. Attach your wires with a screw. Simple!

👤They are expensive. They're expensive everywhere. Black ones have a longer shelf life.

6. GTSE Black Screw Mount Cable

GTSE Black Screw Mount Cable

Strong cable tie base holders can be used in many applications, including at home, in the office, in the workshop, on the computer, on the television, or in the room. It can make your cables, wires, and cables more presentable. Only tie wraps can be used. There are creative approaches available. 100 high quality screw mount zip ties are in the package. The measurement is 4 x 0.1" Tensile strength is 18lb. It's perfect for: cable management, repairing and maintaining machinery, spare parts or in the garden. It's perfect for: cable management, repairing and maintaining machinery, spare parts or in the garden.

Brand: Gtse

👤I haven't used them yet. There were 100 pieces and they seem to be quality.

7. Adhesive Mounts Holders Multi Purpose Anchor

Adhesive Mounts Holders Multi Purpose Anchor

Quality guarantee and 5-star customer service. Let them know if you're not completely satisfied with your cable ties and they'll give you a full refund or replacement. The Zip Tie Adhesive Mounts are small and are suitable for any place. 140 pack cable ties and 140 pack fixing brackets are in it. You can use cable ties to fix some cables, or you can combine the fixing brackets to fix them. It has a new design. It's more practical! It can be locked by adjusting the sliding band, and it is more flexible and effective when used. -40 F to 185 F is not easy to loose after static electricity, the cable tie uses the latest certifiedUL nylon material, high toughness, anti-aging, not afraid of alkali, oil, UV resistance, good insulation, and it is certified by the U.L. The seat is made of PC fireproof material. The 3M Reinforced Patented Adhesive is safe and reliable and does not fall off. It's suitable for home, office, garage, workshop, very suitable for indoor and outdoor use. You can use these to manage cables, wires, and flexible cords. Make your life easier by keeping your cables organized. The Zip Tie Adhesive Mounts are easy to install and use, with no tools, no drilling, and excellent viscosity. There are 140 cable ties. To fix the cable, adjust the size. It's easy to disassemble, and it doesn't destroy the beauty of the furniture. The Zip Tie Adhesive Mounts are guaranteed for a lifetime. They have a lifetime warranty and 60-day money back guarantee. Please contact them if you are not satisfied. The US after-sales service team is open 24/7. There is no risk to buy. The Zip Tie Adhesive Mounts are guaranteed for a lifetime. They have a lifetime warranty and 60-day money back guarantee. Please contact them if you are not satisfied. The US after-sales service team is open 24/7. There is no risk to buy.

Brand: Rythcraft

👤The only thing you need to do is keep them on the surface. It's not easy to do that on some surfaces. 3M wire tie base holders are good for surfaces like steel, flat shiny plastic, tile, and most any smooth, non-oily surface, even if they are outdoors in non-direct sunlight. None have left yet. I always clean the surface of any dirt that will be applied with an adhesive and then use alcohol on a clean rag to remove any oils before mounting, as a rule for anything being applied with an adhesive. One of the few original American companies still making quality products, most still in the U.S., and retaining a brand name is 3M. I will always be willing to pay more for a quality product, but in this case I didn't have to.

👤This product has no instructions. I assume that the 3M logo is legit because of the other reviews on the site. I ran a test because I was confused by the 24 hour comment. I cleaned the brick with isopropal alcohol, let the spot dry for 30 seconds, and then peeled the paper off the glue and applied it to the brick. I waited for 24 hours to test the pad's elasticity. I couldn't remove the anchor pad from the brick using my body weight because of the zip ties attached to it. I would call it a success. I would use this anchor in any application. You don't have to wait 24 hours to apply the pad, as was implied elsewhere.

👤This is a Chinese imitation of 3M foam adhesive, and anyone who has used it knows it. As soon as you put a stiff cable on a surface, it will pick up. If you use the enclosed screws they will probably do a better job of holding this down.

👤I used all of the indoor applications for work. I tried a few places outside and they didn't stick. I put them in a large ziploc because the bag is not resealable.

👤These were purchased to secure speaker wires to the wall. I cleaned the paint before attaching foam, and it stuck the first time. The plastic parts are of good quality. These things are amazing, but I had some doubts. Would buy them again. The best value on the internet may be these.

👤These mounts are used to secure the center inserts. Hot glue and chenille sticks were messy and time consuming. These mounts make it easy to put in inserts. The mounts hold the heavy insert in place, even though it is a bit on the heavy side.

👤I love the baseholders. The other reviewers have noted that the glue is weak. I would like it to come in more bags. It would've been nice to have my own bags. The product is nice. I use it all the time. It makes the room look better. I've noticed that some of the glues are starting to let go of their location. I have no doubt that they will not stand the test of time, but I also don't mind that much as I need the function and can just reinforce with other glues. It is still worth it for the price.

8. South Main Hardware 888018 Speciality

South Main Hardware 888018 Speciality

The quality assurance includes a US manufacturers warranty. The material is nylon 6/6, ul-94v2 certification. The temperature range is -40 degrees to 85 degrees. Attaching Tie objects or structures with a screw mount head. 120 pounds of strength. 100 zip Ties are included in the package. 100 zip Ties are included in the package.

Brand: South Main Hardware

👤It looks like a cable tie. It works well to mount a screw. There are photos of the hole dimensions. The inside diameter is about a quarter of a inch. The outside diameter is not very large. The pan head screw is in the photo.

👤I'm a new parent and not attached to this product or any competitor. I was looking for a way to keep our toddler from pulling down small furniture items, so we could keep our furniture in the wall. The screw-in zip ties might be a smart way to do it as they claim to support 120 lbs and our baby is 20 lbs. My cart was attached to the zip tie. With a small tug, it seemed secure. The zip tie broke when I pulled it a bit harder to estimate my baby's pull force. I'll attach a picture of where the screw hole and long zip tie connect. The link of the product was weak and brittle. Maybe it was a one time defect. It happened on the second zip tie install. It wasn't very hard to tug. I think you have to install it carefully. Make sure the raised square holder for the tie is facing the pull direction and that the elevated hole for the screw is facing the pull direction. If you do it backwards, you don't need much force to break the tie. With the raised up portions of the tie being forced into each other, that may support a bit more force. What are the odds that the proper installation will work? If you think someone may install this wrong, you are better off with something that you can trust. This has a specific way that it could fail with very little pressure.

👤Thank you for your kind words, as pictured and described.

👤It was a pleasure to have and perform as expected. Strong and effective.

👤Ties like these cost five times as much. Amazon is the place to go for everything.

👤Great screw/ZIP ties! You can buy screw/zip ties at any hardware store.

👤I received what I was expecting. Good quality, strong, and UV resistant. It was perfect for my purpose.

👤Je m'attendais. Complte! Exactly what I was expecting. Complete satisfaction!

9. Inch Black Nylon Zip Ties

Inch Black Nylon Zip Ties

This order has 500 pieces. 100 count, very strong and durable, made in the USA. The indoor and outdoor temperatures are -40 F to +185 F. The built-in clip makes it easy to install. The UV material has a great Direct Sunlight rating. The quality assurance includes a US manufacturers warranty. The quality assurance includes a US manufacturers warranty.

Brand: The Cimple Co

👤I have been looking for some good UV resistant outdoor zip ties as most of them don't resist/rated for outdoor and start breaking up. The zip ties are strong and the mounting hole is a great feature. Hope this will last a long time.

👤It's easy to secure wires and cords to walls, furniture, counters, and anything you want to screw them to. Put a screw through the eye to secure your cord after looping the tie around it.

👤I rarely review basic items but of the 10 I have used, 3 have failed to grip. I think 30 worthless zip ties. They only have serrations on one side, so if you wrap in one direction, they won't work. They are not that wide. I would have bought the 100 pack for $11. I only saved $2 and it works out to 30 worthless zip ties.

👤I use a lot of zip ties. A lot. It's easier to clip off the screw hole and use them as standard zip ties if you have the ability to mount them with self-tappers. When I run out, I'll buy them again.

👤There is a screw hole for neat support angles.

👤There are amazing things. Retain to wall with a zip tie or screw.

👤The black mounting tie wraps are not always carried by my local supplier. Black is better outdoors. I needed you to sell them.

👤I got a pack for things that are difficult to remove, but I used razor knife scissors to cut the things I needed.

👤These are the worst ties I have ever seen. 3 out of every 5 ties break. The plastic is very soft. Stay away.

👤I was not happy with the product. The ties are very weak. I tried about eight different ties and all of them broke when I tried to use the hole to attach to a wall.

👤These were brittle. As you tightened the tie, the locking tooth would break at least 25% of the time.

10. Saddle Holder Self Locking Thread Screws

Saddle Holder Self Locking Thread Screws

It is listed for type 21 positioning device. The nylon material used for the cable tie mounts is light and strong. Black cable tie mounts are easy to conceal. Their wire cable tie mounts can be used anywhere. The cable tie mounts are perfect for clean looking wiring. Their plastic cable tie mounts can be used with wire management clips, electronic cord organizers, throttle cable clamps, marine cable clamps, and any other clean looking wiring needs. Their plastic cable tie mounts can be used with wire management clips, electronic cord organizers, throttle cable clamps, marine cable clamps, and any other clean looking wiring needs.

Brand: Folai

👤The product is very useful for wires and cords, it comes with screws, attachment and ties, which is very easy to install.

👤The product is worthless. The screws that are provided break before it's even tight. The heads break off. If you want to buy the zip ties and clips, it's probably not a problem. Don't use the screws if you plan on doing so. I thought the first one was a mistake. I can't remove the screws from my desk. Pre-drilling holes to remove tension off the screw adds work. I might risk drilling too far. These are very cheap.

👤I used these to run some equipment in a large room. I wanted the cable to be on the floor. I secured them with cabinet screws every 16 inches into the studs. They fit perfectly and didn't interfere with the cable. I put the baseboards on the wall. The cable wouldn't interfere with the furniture being pushed up against the baseboard. They are not very pretty to look at, but they are very secure.

👤I tried to remove the head from the first three screws. The pilot hole wasn't big enough. The pilot was the perfect size, but I didn't have the drill clutch on the weakest setting. I broke three of them using a screwdriver. The plastic part looks great but I can't affix it to anything without a trip to the hardware store to buy real screws.

👤I like the cable ties mounts. I don't like having cables hanging off my desk. The cables are attached to the underside of my desk. The mounts handled the bundle of cable just fine, since it was my largest bundle of cables. I was happy to see that they provided extras, as one of the mounts wasn't complete. It looked like it had been melted. I received additional mounts and zip ties.

👤The plastic anchors screw into the wall. I am guessing that using command strips for a more temporary feature is possible. I have wires and cords for my entertainment setup and computers that are organized and run along the wall and for the price you can't beat these mounts. They use zip ties to hold the cords to the wall, so you can do different sizes depending on how long your zip ties are and how heavy the things you are mounting are.

👤It took me a few hours to get my entire setup rewired. The screw heads are too big if you're penny pinching and trying to use the same screws to bolt surge protectors. You can start the hole with an ice pick or something, then screw it in wherever you please. They fit my larger zip ties. Very happy.

👤I used these to hold a small bundle of wire when I wired external security cameras. They are strong and right size for me. The complete set includes the saddle, screws and zip ties. For mounting against wood, the screws are fine, but not for stucco or concrete.

11. Adhesive Mounts Holders Multi Purpose Sticky

Adhesive Mounts Holders Multi Purpose Sticky

Zip Ties have mounting eyes that accept screws. Any cable which is less than 8mm can be used with the 100 Pack of Adhesive Cable Tie Mounts, Cable Tie Bases. The cable tie brackets are made of lightweight materials. Super glue is durable and the self-adhesive materialize contains it. The cable tie has a strong friction, which can keep it neat. It is easy to use cable tie mounts. Place firmly on a clean, dust-free surface after removing the backing paper. The built-in screw hole can be used for added strength. The cable tie is stopped at the desired length by the locking teeth on the flexible tip. The cable tie sticky pads can be installed quickly and can make your cables more orderly. The cable tie base holders are strong. Before use, please clean the surface of the dust. Strong cable tie base holders can be used in many applications, including at home, in the office, in the workshop, on the computer, on the television, or in the room. It can make your cables, wires, and cables more presentable. Only tie wraps can be used. There are creative approaches available. Strong cable tie base holders can be used in many applications, including at home, in the office, in the workshop, on the computer, on the television, or in the room. It can make your cables, wires, and cables more presentable. Only tie wraps can be used. There are creative approaches available.

Brand: Lvxforest

👤I used the self stick stand offs to hold the power unit in the top left corner of the photo. When you stick the stand to the surface, hold the stand off for 30 seconds. The tye raps are not very good. The tab wouldn't hold when you pulled it tight. Buy the raps with a metal tab.

👤Zip ties and backs worked well for my project.

👤If you want to stick well, you need to clean and etch the surface.

Summary

What is the best product for screw eye zip ties?

Screw eye zip ties products from Fixson. In this article about screw eye zip ties you can see why people choose the product. The Cimple Co and Hs are also good brands to look for when you are finding screw eye zip ties.

What are the best brands for screw eye zip ties?

Fixson, The Cimple Co and Hs are some of the best brands that chosen by people for screw eye zip ties. Find the detail in this article. Gardner Bender, Perfect Vision and Gtse are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com